A complete self-contained thermostatically controlled water heater. Immersion
parts & hanger made of stainless steel. Visual off-on switch with pilot
light which indicates when heater is being energized. Completely automatic
& portable with cord & plug ready for use. 6000 watt; 240 volts single
phase. Requires a 220 outlet.
Model 700 Price $345.00
Construction Features
With Fill Port & Automatic Water Level Control & Automatic Heating & Low Water Cut Off Protection for Heater & Pump.
Operation
When power is turned on, baptistry will automatically fill & turn off at proper level. Heater (& pump) automatically turn on & heat baptismal water to adjustable thermostat temperature. Heater & pump turn off. Proper water level is automatically maintained. Heater & pump are protected against abnormal low water condition.
Model 300 Price $185.00
Note:
Wall spouts of other styles can be supplied in place of the flush fill port.
Model 220 Electrical Interrupter is designed to completely turn off all power to the Baptistry Heating Electrical System if there is a short of only 5 to 6 miliamps. This interrupter completely protects people from electrical shock.
The National Electrical Codes in many states, counties & cities are requiring that a ground fault interrupter must be installed in electrical systems where it is possible for people to be subjected to a short-to-ground condition.
Model 220 rated at 30A., will handle the 6KW, or 11.5KW Circulation Heaters. It can also be installed for use with the 6KW Immersion Heater, Model 700.
Wiring diagrams are supplied with the Ground Fault Interrupter. Always install GFI as close to the heater as possible. Nipple the GFI to the contactor box or heater cover box.
Model 220 Price $110.00
Model 200 Inline Filter / Skimmer
This cartridge type filter skims water from the surface to filter out sediment. Washable filter insert.
Model 200 Price $95.00
Model 30 Optional Baptistry Window
Available as an option on most baptistries, this acrylic window allows better viewing of the baptism. This is especially helpful is the baptistry is elevated above ground level. The sturdy ½” acrylic window is shipped in protective paper with silicone sealant for installation by your contractor. We recommend installing the window last, to prevent possible damage.
Model 30 Price $ 175.00
Model 65 Child’s Step
Removable step raises short children 12” for visibility. Includes toe-hold bar & suction cups for attachment.
Model 65 Price $155.00
Places a child at the proper height. Nonskid surface. This versatile accessory can be used as a step for children or as a seat for adults. Includes toe-hold bar & suction cups for attachment. Seat permits baptism of large adults from seated position.
Model 75 Price $195.00
Model 60 Drip Landings
Place these fiberglass landings at the top of your baptistry steps to catch dripping water from wet robes. Designed to mount at ends of baptismal pool steps for drainage. Sloped skid resistant.
Model 60 Price $145.00
We manufacture two models of Hotomatic® Gas Water Heater which may be used with either natural gas or L-P gas. (NATURAL or L-P) - This an ideal & efficient water heating system. The pump Model 320 & heater must not be turned on until after the fiberglass baptistry is filled. The water then will be circulated through the heater until it reaches the temperature setting on the thermostat & aquastat (95° to 105°)
PUMP CIRCULATION SYSTEM available in two sizes.
Hotomatic (65,000 BTU) aquastat & thermometer. Will give 35° temperature rise in 5 1/2 hours (750 gallons). Shipping Weight 39 lbs. L-P or Natural Gas-Model 810 Price $750.00.
Hotomatic (120,000 BTU) aquastat & thermometer. Will give 35° temperature rise in 3 hours (750 gallons). Shipping weight 80 lbs. L-P or Natural Gas-Model 825 Price $995.00.
A quality plumbing unit with chrome plated fittings. An easily accessible drain release lever is located on the overflow fitting. Just flip the lever to drain the fiberglass baptistry. For 1 1/2" connections. (Not installed) Model 15 Price $70.00.
Deck mounted, chrome plated, single valve fill faucet. Can be easily mounted at the best location on the rim. For 1/2" connections. Model 10 Price $50.00
  |
A Deluxe, completely automatic remote control system provides effortless, accurate control of all fill, heat & drain functions from an attractive remote control console panel. Included in the Automatic 5000 are:
Model 5000 Price $510.00
All functions of this Complete Automatic Control System are operated by one 3-way "on," "off," "drain" switch. This switch can be located at any convenient location - for instance - the Pastor's study. Two 24-volt circuits are all that is required from switch to baptistry heater contractor & drain. All controls, materials, heater, etc., are supplied with complete installation & wiring instructions. Model 600 Heater is extra (See Below).
A complete hot water generating plant with tubular element in all copper construction. Built-in thermostat, temperature range 55° - 180°, F, responds quickly & accurately to maintain predetermined temperature. Insulated galvanized steel pipe body guarantees clean & hot water for years. Elements & thermostat easily replaceable from stock should the need arise. Available in two sizes. (Not installed)
For the ideal heating system we recommend one 5,500 watt heater with one 310 heater installation kit ($50.00) & one Model 320 recirculation pump ($150.00) for a more uniform distribution of warm water (35° temp. rise in 12 hours.) Model 650 Heater System. (This includes all three) Price $465.00
6,000 watt, 240 volt,single phase Model 600 Price $275.00
11,500 watt, 240 volt, single phase Model 1200 Price $450.00
Model 310 HEATER INSTALLATION KIT
Consists of chrome plated brass flanges, gaskets & all hardware to install this heater on any fiberglass baptistry wall with a thickness not over 1/2", Model 310. IMPORTANT - Block under heater to support weight in order to help prevent leakage of fiberglass baptistry wall fittings.
P.O.
Box 2250
Danville, VA 24541
Call 1-800-446-7400
Fax 1-434-822-2210
Click here to e-mail
 |
|||
|
